"Your Local Source for Gases, Welding Equipment, and More..."
Call Us Now!7:30 AM - 5:00 PM502.637.4771

MILLERMATIC 252 200/208/230

Call for Price

SKU: 907321 Categories: , Brand:


Highest Output in its Class!
(250 A at 28 VDC). Weld longer on high-end applications.

Auto Gun Detect™
Miller’s Auto Gun Detect allows operator to simply pull trigger on MIG gun, spool gun or push/pull gun. Automatically detects and recalls the voltage, wire feed speed and timer of the active gun.

Angled, Dual-Gear Driven, Cast Aluminum Drive System
Features no-tool, quick-change reversible drive rolls and an easy-to-set, scaled tension knob.

EZ-Access™ Consumable Compartment and Parameter Chart.
Set weld parameters right the first time with convenient new flip-down compartment that provides fast access to parameter chart and consumables.

Large, Digital Front Panel with Built-in Digital Timers Menu
Enables operator to preset voltage and wire feed speed. Standard run-in, pre/postflow, burnback, spot/delay (stitch) timer menu.

Push-Pull Gun Direct Connect
Compatible with Spoolmate 200 Series spool gun with wire feed speed control on the gun. This saves time by reducing trips back to the machine. Also compatible with more industrial Spoolmatic 15A or 30A spool gun.

EZ-Change™ Low Cylinder Rack
Allows operators to easily roll cylinders on and off of rack – no need to lift cylinders.

Larger Work Area

Now with longer 15-ft M-25 gun.

Input Power
Requires 1-Phase power

Rated Output
200 Amps at 28 VDC, 60% duty cycle
250 Amps at 28 VDC, 40% duty cylcle

Welding Amperage Range
30 – 300 Amps

Wire Speed
50 – 700 IPM (1.3 – 17.8 m/min)

Net Weight 207 lb (94 kg)

WireDiameter Capacity
.023 – .045 in (0.6 – 1.2 mm) Solid Steel
.023 – .045 in (0.6 – 1.2 mm) Stainless
.030 – .045 in (0.8 – 1.2 mm) Flux Cored

MaxSpoolSize Capacity
12 in (305 mm)

Comes Complete With:
Millermatic 252 power source
10 ft (3 m) power cord and plug
15 ft (4.6 m), 250 amp M-25 MIG gun for .030/.035 in wire
10 ft (3 m) work cable and clamp
Argon mix regulator/flow gauge and hose
Extra contact tips
Factory-installed running gear with EZ-Change™ Single Low Cylinder Rack
.030/.035 in reversible drive rolls
Set-up and operation interactive CD

Additional information


Steel, Stainless, Aluminum

Current Type


Amperage Range

<100, 100 – 200, 200 – 300

Capacity Range

14g, 3/16", 1/4", 3/8", 5/16", 1/2"

Input Voltage

208V, 220/230/240V


1 – Phase

Output Mode



There are no reviews yet.

Be the first to review “MILLERMATIC 252 200/208/230”

Your email address will not be published. Required fields are marked *

Pin It on Pinterest

Please fill out the information below to see our Cylinder Exchange Policy Information

  • This field is for validation purposes and should be left unchanged.

Contact Us